Characterization of fibril reinforced membranes for fuel cells

Characteristics of fibril reinforced membranes developed by Asahi Glass Company are reviewed. PTFE-fibrils <1 μm in diameter are dispersed in ion-exchange membranes uniformly. Mechanical properties, such as tensile strength, tear strength, creep property and compressive property were examined and compared with non-reinforced membranes. Fibril reinforced membranes, even by the addition of a small amount of PTFE-fibrils (2.7 wt.%), show excellent mechanical strength, especially in creep and tear strength. Cell performance is nearly equal to the one using a non-reinforced membrane and cell voltage stays about the same during the cell operation at 80 °C for 3000 h.     

Formation process of silver-polypyrrole coaxial nanocables synthesized by redox reaction between AgNO3 and pyrrole in the presence of poly(vinylpyrrolidone)

We have recently demonstrated a one-step process to fabricate silver-polypyrrole (PPy) coaxial nanocables (Chen, A.; Wang, H.; Li, X. Chem. Commun. 2005, 14, 1863). The formation process of silver-PPy coaxial nanocables is discussed in this article. It was found from the results of TEM and SEM images that large numbers of silver atoms were formed when AgNO3 was added to a pyrrole solution. Then silver atoms transform to silver-PPy nanosheets with regular morphology, which will connect together to be more stable. Silver-PPy nanocables will be able to grow at the expense of the silver-PPy nanosheets. Poly(vinylpyrrolidone) (PVP) plays crucial roles in this process: as a capping agent to form silver nanowires, and as a dispersant of pyrrole monomers, which can influence the site at which pyrrole monomer exists. On the basis of experimental analysis, the possible mechanism was proposed. Because of the effect of PVP, silver ions and pyrrole monomers are apt to be adsorbed at the [111] and [100] facets of silver nanosheets, respectively. Obvious polymerization will take place on the boundary of the [111] and [100] facets. The PPy layer stays stable on the [100] facets. Meanwhile, newly formed silver atoms and silver nanosheets will further ripen and grow on the [111] facets. In a word, the morphology of final products and the formation process are determined by the reaction site between AgNO3 and the pyrrole monomer, which is influenced by PVP.     

Synthesis of novel 1,4-, 3,4-, and 4,5-dihydropyrimidines: First successful POCl3 chlorination and regioselective alkoxycarbonylation

Chlorination of 5,6-dihydropyrimidine-4-(3H)-one derivatives (1) with POCl₃ gave 1,4(3,4)-dihydropyrimidines (3), whose alkoxycarbonylation (ClCOOREt₃N or NaH) afforded regioselectively novel compounds (4). A new Pummerer rearrangement of compound (1, X= ---S(O)CH₃) with ₃, gave compound (5h).     

An analysis of the through-bond interaction using the localized molecular orbitals—IV: Long-range proton hyperfine coupling in exo- and endo-hydrogens in bicyclo[2.1.1]hex-5-yl radical

The INDO calculations were performed on bicyclo[2.1.1]hex-5-yl radical. From these calculations, it was confirmed that the hyperfine coupling constants depend largely on the geometry of the α hydrogen. The localized MO's were obtained from the canonical MO's calculated by using the INDO method. With the use of the localized MO's thus obtained, the variation in the hyperfine coupling constants at the 6exo- and 6endo-protons in this radical was explained in terms of the through-bond and/or the through-space interactions according to the procedure which we proposed previously. That is by the procedure we can selectively pick up a particular interaction between the specified localized MO's. The hyperfine coupling constant in this radical can be expressed by the summation of several interaction terms. The difference in the hyperfine spin coupling constants of the H_6exo and H_6endo in the radical now concerned has been attempted to explain using MO coefficients of the occupied orbitals.     

Cardiac glycosides: 3. synthesis of β-D-digitoxose analogues

Earlier studies have shown that the β-D-digitoxose (2,6-dideoxy-β-D-mannopyranose) directly attached to the cardiac glycoside steroid C3 has the greatest effect on biological activity. This report describes the synthesis of eight digitoxosides (2a-9a), with widely varying cyclic and acyclic C17β-side groups, and the corresponding C3',C4'-acetonides (2b-9b). NMR analysis of conformational strain introduced by the acetonide groups is supported by crystallographic analysis of the sugars' torsion angles.     

ESR Study of a Nitroxide Radical in Sol-Gel Glasses

A spin probe TEMPOL (4-hydroxy-2,2,6,6-tetramethylpiperidinyl-1-oxy) was dissolved in a tetraethyl orthosilicate sol-gel reaction system and measured by electron spin resonance spectroscopy at 295 K. The nitrogen hyperfine coupling constant was from 1.64–1.66 mT in the sol-gel solutions. The values were sensitive to the ethanol-to-water ratio of the solutions. The hyperfine coupling constant in the xerogels was 1.70 mT, which was almost the same as that in water, indicating that the probe molecules were trapped in silica pores with water adsorbed on the silica surfaces. The motion of TEMPOL in the xerogels was considerably slower than in the sol-gel solutions. The local viscosity estimated was from 70–90 cP. The ESR spectra of TEMPOL were altered during the sol-gel process, indicating that adsorbed water on the silicas surfaces has an important role for trapping organic molecules in sol-gel glasses.     

Viscoelastic properties of single poly(ethylene glycol) molecules.

The viscoelastic properties of single poly(ethylene glycol) (PEG) molecules were measured by analysis of thermally and magnetically driven oscillations of an atomic force microscope (AFM) cantilever/molecule system. The molecular and monomer stiffness and friction of the PEG polymer were derived using a simple harmonic oscillator (SHO) model. Excellent agreement between the values of these two parameters obtained by the two approaches indicates the validity of the SHO model under the experimental regimes and the excellent reproducibility of the techniques. A sharp minimum in the monomeric friction is seen at around 180 pN applied force which we propose is due to a force induced change in the shape of the energy landscape describing the conformational transition of PEG from a helical to a planar state, which in turn affects the timescale of the transition and therefore modifies the measured internal friction. A knowledge of the viscoelastic response of PEG monomers is particularly important since PEG is widely used as a linker molecule for tethering groups of interest to the AFM tip in force spectroscopy experiments, and we show here that care must be exercised because of the force-dependent viscoelastic properties of these linkers.     

Synthesis and Photocatalytic Property of Hectorite/(Pt,TiO2) and H4Nb6O17/(Pt,TiO2) Nanocomposites

Abstract

TiO₂ and Pt have been intercalated in hectorite and H₄Nb₆O₁₇. The height of TiO₂ and Pt pillars was less than 0.8 nm and the band gap energy of TiO₂ pillars was ca. 3.3 eV. Both hectorite/TiO₂ and H₄Nb₆O₁₇(Pt, TiO₂) were capable of hydrogen evolution following irradiation from a high pressure mercury are (λ > 290 nm) in the presence of methanol as a sacrificial hole acceptor and the hydrogen evolution was enhanced by co-incorporation of Pt, although hectorite and hectorite/Pt did not show photocatalytic activity. Incorporation of Pt or Pt and TiO₂ in the interlayer of H₄Nb₆O₁₇ has resulted in enhanced photo evolution of hydrogen, however, TiO₂ alone in the interlayer of H₄Nb₆O₁₇ showed adverse photocatalytic activity.